View source for Victory Programmer Environment (VPE) Installation

VPE installation on GT.M

1) Download VPE from hardhats:  
	http://www.hardhats.org/tools/vpe/vpe_db.html

	(Be sure to get Greg Kreis' ''VPE User's Guide'', too:  
	http://www.hardhats.org/tools/vpe/vpe_db3.html .)


2) Decompress the downloaded file on /tmp (or dir. of your choice)


[[Image:Vpe1.jpg|Vpe1.jpg]]


3) Since those files were made for Windows, you must change them to UNIX format. You must use the command dos2unix. The files that must be changed are:
VPE_12_Rtns.MGR and VPE_12_Rtns.PRD.


[[Image:Vpe2.jpg|Vpe2.jpg]]


4) Now you must load the files you just transformed to UNIX format onto MUMPS. Start MUMPS and type D ^%RI.


[[Image:Vpe3.jpg|Vpe3.jpg]]


5) When asked for Formfeed delimited you must type the complete path to the files VPE_12_Rtns.MGR and when asked for 
output directory you must give the complete path to your vista routines directory.


[[Image:Vpe4.jpg|Vpe4.jpg]]


[[Image:Vpe5.jpg|Vpe5.jpg]]


6) You must repeat the above steps for file VPE_12_Rtns.PRD. Once both files are loaded you must execute D ^ZVEMBLD


[[Image:Vpe6.jpg|Vpe6.jpg]]


7) Press enter until you get back into GTM>


[[Image:Vpe7.jpg|Vpe7.jpg]]


8) Now do GTM>D ^VEEMINIT


[[Image:Vpe8.jpg|Vpe8.jpg]]


9) Answer YES when asked and enjoy MUMPS


[[Image:Vpe9.jpg|Vpe9.jpg]]