View source for Configuring Taskman, Mailman and RPC Broker

From the GTM prompt
Enter "D ^ZTMCHK" to check if TaskMan's environment is OK.
This will display two screens with information on TaskMan's environment.

 
 GTM> D ^ZTMCHK
 
 Checking Task Manager's Environment.
 
 Checking Taskman's globals...
 ^%ZTSCH is defined!
 ^%ZTSK is defined!
 ^%ZTSK(-1) is defined!
 ^%ZIS(14.5,0) is defined!
 ^%ZIS(14.6,0) is defined!
 ^%ZIS(14.7,0) is defined!
  
 Checking the ^%ZOSF nodes required by Taskman...
 All ^%ZOSF nodes required by Taskman are defined!
  
 Checking the links to the required volume sets...
 There are no volume sets whose links are required!
 
 Checks completed...Taskman's environment is okay!
  
 Press RETURN to continue or '^' to exit:
  

 Here is the information that Taskman has:
 Operating System: GT.M (Unix)
 Volume Set: ROU
 Cpu-volume Pair: ROU:bonez
 TaskMan Files UCI and Volume Set: ROU,ROU
  
 Log Tasks?
 Default Task Priority:
 Submanager Retention Time: 0
 Min Submanager Count:
 Taskman Hang Between New Jobs: 0
 TaskMan running as a type: GENERAL
  
 Logons Inhibited?: N
 Taskman Job Limit: 9999
 Max sign-ons: 1000
 Current number of active jobs:
  
 End of listing. Press RETURN to continue:


If TaskMan's environment is OK, start TaskMan.
Go back to the GTM prompt and type "D ^ZTMB" to start TASKMAN.

 GTM> D ^ZTMB

You will probably not see any output from this command.
 
To monitor TaskMan, enter "D ^ZTMON" from the GTM prompt.
Enter "^" at the UPDATE// prompt to exit the monitor or enter a "?" to see what the other options are.

 GTM> D ^ZTMON
 
 Checking Taskman. Current $H=59991,54440 (Apr 01, 2005@15:07:20)
 
                     RUN NODE=59991,54432  (Apr 01, 2005@15:07:12)
 
  
 Taskman is current..
 Checking the Status List:
 Node weight status time $J
 ROU:bonez RUN T@15:07:12 5933 Main Loop
 
 Checking the Schedule List:
 Taskman has no tasks scheduled.
 
 Checking the IO Lists:
 There are no tasks waiting for devices.
 
 Checking the Job List:
 There are no tasks waiting for partitions.
 For VISTA:NTA there are 0 tasks. Out Of Service
 For VISTA:NTB there are 0 tasks. Out Of Service
 
 Checking the Task List:
 There are 2 tasks currently running.
 On node ROU:bonez there is 1 free Sub-Manager(s). Status: Run
  
 Enter monitor action: UPDATE//^


Now send a message using Postmaster to your DUZ number.
 
From the GTM prompt:

 GTM> S DUZ=.5 D ^XUP

You will get the response SETTING UP PROGRAMMER ENVIROMENT then TERMINAL TYPE SET TO: (your default) and Select OPTION NAME: 
Respond: "XMUSER". 
At Select Mailman Menu Option: type "S" (for send).
At Subject: enter your subject, such as Test, and then hit enter.
 
You will then be prompted You may enter the text of the message and you will be offered the line number 1> where you can type your message, such as the infamous Hello world. Next will be line 2> and if you are done, just hit enter and at EDIT Option: you can do the same.
 
At Send mail to: POSTMASTER// enter the initials you used for your DUZ which were probably SM for System Manager.
 
You will then be told when MailMan was last used, which is probably NEVER. Hit enter at And Send to: and you should receive the message Select Message option: Transmit now// at which you hit enter and will hopefully receive the message Sending [1] Sent. Type "^" to exit.

 GTM>S DUZ=.5
 
 GTM>D ^XUP
 
 Setting up programmer environment
 This is a TEST account.
 
 Terminal Type set to: C-VT100
 
 Select OPTION NAME: XMUSER MailMan Menu
 
 VA MailMan 8.0 service for POSTMASTER@BONEZ.OSWIZARDS.COM
 You last used MailMan: 01/18/05@15:11
 You have no new messages.
 
 Select MailMan Menu Option: S Send a Message
 
 Subject: TESTING
 You may enter the text of the message...
 1>Hello, this is a test of the Emergency Broadcast System
 2>
 EDIT Option:
 Send mail to: POSTMASTER// SA ADMINISTRATOR,SYSTEM IRM
 Last used MailMan: 04/01/05@14:23
 And Send to: MHS STREET,MARK H IRM Last used MailMan: Never
 And Send to:
 
 Select Message option: Transmit now// Sending [1]...
 Sent
 
 Select MailMan Menu Option:

Now see if you received your mail.
 
 Log on using "D ^ZU".
 
 At the Systems Manager prompt, type "MAIL".
 Then at the Select MailMan Menu Option: type "NEW" Messages and Responses. Read the mail.

 GTM>D ^ZU
 
 Volume set: ROU:bonez UCI: VAH Device: /dev/pts/1
 
 ACCESS CODE: ********
 VERIFY CODE: ********
 
 Good afternoon root
 
    You last signed on today at 15:18
 
 
 
 Select Systems Manager Menu Option: MAILMan Menu
 
 VA MailMan 8.0 service for ADMINISTRATOR.SYSTEM@BONEZ.OSWIZARDS.COM
 You last used MailMan: 04/01/05@15:19
 You have 1 new messages.
 
 Select MailMan Menu Option: 
 NEW
 
 Subj: TESTING [#1] 04/01/05@15:13 1 line
 From: POSTMASTER In 'IN' basket. Page 1
 
 
 
 Hello, this is a test of the Emergency Broadcast System
 
 Enter message action (in IN basket): Ignore//

Start and test the RPC Broker.
 The RPC Broker is VistA's Client/Server software and is needed by VistA's GUI client.
 
 Type "D STRT^XWBTCP(port)" at the GTM prompt.
 The system status should now show the broker listener (XWBTCPL) running.

 GTM>D STRT^XWBTCP(9200)
 Start TCP Listener...
 Checking if TCP Listener has started...
 TCP Listener started successfully.
 GTM>


A quick overview of starting and stopping TaskMan, HL Filer Monitor and RPC Broker Listener components is in order.

1.  To start TaskMan;
GTM>D ^ZTMB
--------------

2.  To start Background Filers
 GTM>D ^XUP
 
 Setting up programmer environment
 Access Code:
 
 Terminal Type set to: C-VT100
 
 Select OPTION NAME: START BACKGROUND FILER XMMGR-START-BACKGROUND-FILER     STA
 RT background filer
 START background filer
 
 << Background Filers will start soon. >>            
 ---------------

3.  To start HL Filer Monitor

 GTM>D ^XUP
 
 Setting up programmer environment
 Terminal Type set to: C-VT100
 
 Select OPTION NAME: HL FILER MONITOR
 
 Task Number of    Asked
 Incoming Filer    To Stop   Last Known Date/Time   Time Difference
 ** No incoming filers are running **
 
 
 Task Number of    Asked
 Outgoing Filer    To Stop   Last Known Date/Time   Time Difference
 ** No outgoing filers are running **
 
 (+I) Start incoming filer  (-I) Stop incoming filer  (*I) Delete incoming filer
 (+O) Start outgoing filer  (-O) Stop outgoing filer  (*O) Delete outgoing filer
 (N) Next 4 lines in list   (B) Back 4 lines in list  (Q) Quit
 Type selection:Q

-----------------

4.  Start the RPC Broker Listener, pick a port you want to run the listener on. ex. 9210

GTM>D STRT^XWBTCP(9210)
-----------------

5.  To Stop RPC Broker Listener.

GTM>D STOP^XWBTCP(9210)
-----------------

6.  To stop Mailman Background Filers

GTM>D ^XUP

Setting up programmer environment
Access Code:

Terminal Type set to: C-VT100

Select OPTION NAME: STOP BACKGROUND FILER
-----------------

7.  To stop HL FILER MONITOR run the exact same command as above and pick the proper selection
from the menu at the bottom of the monitor. 

GTM>D ^XUP

Setting up programmer environment
Terminal Type set to: C-VT100

Select OPTION NAME: HL FILER MONITOR

Task Number of    Asked
Incoming Filer    To Stop   Last Known Date/Time   Time Difference
** No incoming filers are running **


Task Number of    Asked
Outgoing Filer    To Stop   Last Known Date/Time   Time Difference
** No outgoing filers are running **

(+I) Start incoming filer  (-I) Stop incoming filer  (*I) Delete incoming filer
(+O) Start outgoing filer  (-O) Stop outgoing filer  (*O) Delete outgoing filer
 (N) Next 4 lines in list   (B) Back 4 lines in list  (Q) Quit
Type selection:-I
-------------------

8.  To stop TaskMan

GTM>D STOP^ZTMKU

Are you sure you want to stop TaskMan? NO//Y

Shutting down TaskMan

Should active submanagers shut down after finishing their current tasks? NO//Y

Okay!
--------------------

9.  Rundown the database, from the vista user's shell prompt you can choose the alias or
you can run the mupip command

vista$ rundown

or 

mupip rundown -r "*"
--------------------