Difference between revisions of "C0Q Quality Reporting 1.0"
From VistApedia
(→Create Utility Performance Measures) |
(→Create new MU Utility Measures) |
||
| Line 198: | Line 198: | ||
==== Create new MU Utility Measures ==== | ==== Create new MU Utility Measures ==== | ||
| − | The package distributes the MU Quality Measures; but the Utility measures you have to create on your own. Follow the table below to create the utility measures using option '''MU MEASURE EDIT'''. | + | The package distributes the MU Quality Measures; but the Utility measures you have to create on your own. Follow the table below to create the utility measures using option '''MU MEASURE EDIT'''. Example of how to enter them are below. If you are doing this for real, make sure to print the table and follow it. |
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
| Line 219: | Line 219: | ||
| Record required vital signs || Check vital signs from July 3rd 2011 to present for this patient || MU12-EP-HasVitalSigns || MU12-EP-ALL-PATIENTS || Rate > 50% | | Record required vital signs || Check vital signs from July 3rd 2011 to present for this patient || MU12-EP-HasVitalSigns || MU12-EP-ALL-PATIENTS || Rate > 50% | ||
|- | |- | ||
| − | | Record smoking status for patients aged 13 yrs and up || Check health factors in the category Tobacco; see if patient will have these. If none found in the category, each possible health factor in a list is tried by itself. || MU12-EP-HasSmokingStatus || MU12-Over12 || Rate > 50% | + | | Record smoking status for patients aged 13 yrs and up || Check health factors in the category Tobacco; see if patient will have these. If none found in the category, each possible health factor in a list is tried by itself. || MU12-EP-HasSmokingStatus || MU12-EP-Over12 || Rate > 50% |
|- | |- | ||
| Report clinical quality measures to CMS || N/A || N/A || N/A || Report YES. Reporting specific Quality Measures will be described later. | | Report clinical quality measures to CMS || N/A || N/A || N/A || Report YES. Reporting specific Quality Measures will be described later. | ||
| Line 234: | Line 234: | ||
|} | |} | ||
| − | <pre | + | <pre> |
| − | + | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | |
| − | + | ||
| − | 1 | + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #1 CPOE |
| − | 2 | + | NAME: MU CORE MEASURE #1// |
| − | CHOOSE 1-2: | + | MEASURE TYPE: Performance// |
| + | MU YEAR KEY: | ||
| + | TITLE: | ||
| + | VERY LONG DESCRIPTION: | ||
| + | THERE ARE NO LINES! | ||
| + | Edit? NO// | ||
| + | DISPLAY NAME: CPOE// | ||
| + | REPORTING NAME: | ||
| + | ALTERNATIVE NUMERATOR LIST: MU12-EP-HasMed | ||
| + | 1 MU12-EP-HasMed MU12-EP-HasMed | ||
| + | 2 MU12-EP-HasMedOrders MU12-EP-HasMedOrders | ||
| + | 3 MU12-EP-HasMedRecon MU12-EP-HasMedRecon | ||
| + | CHOOSE 1-3: 2 MU12-EP-HasMedOrders MU12-EP-HasMedOrders | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS | ||
| + | |||
| + | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | ||
| + | |||
| + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #3 Problem List | ||
| + | NAME: MU CORE MEASURE #3// | ||
| + | MEASURE TYPE: Performance | ||
| + | MU YEAR KEY: | ||
| + | TITLE: | ||
| + | VERY LONG DESCRIPTION: | ||
| + | THERE ARE NO LINES! | ||
| + | Edit? NO// | ||
| + | DISPLAY NAME: Problem List// | ||
| + | REPORTING NAME: | ||
| + | ALTERNATIVE NUMERATOR LIST: MU12-EP-HasProblem// | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS | ||
| + | // | ||
| − | + | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | Select QUALITY | + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #4 |
| + | Are you adding 'MU CORE MEASURE #4' as | ||
| + | a new C0Q QUALITY MEASURE (the 91ST)? No// Y (Yes) | ||
| + | C0Q QUALITY MEASURE DISPLAY NAME: ERx | ||
| + | NAME: MU CORE MEASURE #4// | ||
| + | MEASURE TYPE: p Performance | ||
| + | MU YEAR KEY: ? | ||
| + | Answer must be 1-30 characters in length. | ||
| + | MU YEAR KEY: | ||
| + | TITLE: | ||
| + | VERY LONG DESCRIPTION: | ||
| + | THERE ARE NO LINES! | ||
| + | Edit? NO// | ||
| + | DISPLAY NAME: ERx// | ||
| + | REPORTING NAME: | ||
| + | ALTERNATIVE NUMERATOR LIST: MU12-EP-HasERX MU12-EP-HasERX | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU-EP-ALL?? | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS | ||
| + | Select C0Q QUALITY MEASURE NAME: | ||
| − | + | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #5 |
| + | Are you adding 'MU CORE MEASURE #5' as | ||
| + | a new C0Q QUALITY MEASURE (the 92ND)? No// y (Yes) | ||
| + | C0Q QUALITY MEASURE DISPLAY NAME: MU12-EP-HasMed | ||
| + | NAME: MU CORE MEASURE #5// | ||
| + | MEASURE TYPE: | ||
| + | MU YEAR KEY: | ||
| + | TITLE: | ||
| + | VERY LONG DESCRIPTION: | ||
| + | THERE ARE NO LINES! | ||
| + | Edit? NO// | ||
| + | DISPLAY NAME: MU12-EP-HasMed// Active Medication List | ||
| + | REPORTING NAME: | ||
| + | ALTERNATIVE NUMERATOR LIST: MU12-EP-HasMed | ||
| + | 1 MU12-EP-HasMed MU12-EP-HasMed | ||
| + | 2 MU12-EP-HasMedOrders MU12-EP-HasMedOrders | ||
| + | 3 MU12-EP-HasMedRecon MU12-EP-HasMedRecon | ||
| + | CHOOSE 1-3: 1 MU12-EP-HasMed MU12-EP-HasMed | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS | ||
| + | |||
| + | Select C0Q QUALITY MEASURE NAME: | ||
| + | |||
| + | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | ||
| + | |||
| + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #6 | ||
| + | Are you adding 'MU CORE MEASURE #6' as | ||
| + | a new C0Q QUALITY MEASURE (the 93RD)? No// y (Yes) | ||
| + | C0Q QUALITY MEASURE DISPLAY NAME: Allergy Documentation | ||
| + | NAME: MU CORE MEASURE #6// | ||
| + | MEASURE TYPE: | ||
| + | MU YEAR KEY: ^meas,typ MEASURE TYPE | ||
| + | MEASURE TYPE: p Performance | ||
| + | MU YEAR KEY: | ||
| + | TITLE: | ||
| + | VERY LONG DESCRIPTION: | ||
| + | THERE ARE NO LINES! | ||
| + | Edit? NO// | ||
| + | DISPLAY NAME: Allergy Documentation Replace | ||
| + | REPORTING NAME: | ||
| + | ALTERNATIVE NUMERATOR LIST: MU12-EP-Has | ||
| + | 1 MU12-EP-HasAllergy MU12-EP-HasAllergy | ||
| + | 2 MU12-EP-HasDemographics MU12-EP-HasDemographics | ||
| + | 3 MU12-EP-HasERX MU12-EP-HasERX | ||
| + | 4 MU12-EP-HasMed MU12-EP-HasMed | ||
| + | 5 MU12-EP-HasMedOrders MU12-EP-HasMedOrders | ||
| + | Press <Enter> to see more, '^' to exit this list, OR | ||
| + | CHOOSE 1-5: 1 MU12-EP-HasAllergy MU12-EP-HasAllergy | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS | ||
| + | |||
| + | Select C0Q QUALITY MEASURE NAME: | ||
| + | |||
| + | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | ||
| + | |||
| + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #7 | ||
| + | Are you adding 'MU CORE MEASURE #7' as | ||
| + | a new C0Q QUALITY MEASURE (the 94TH)? No// y (Yes) | ||
| + | C0Q QUALITY MEASURE DISPLAY NAME: Required Demographics Present? | ||
| + | NAME: MU CORE MEASURE #7// | ||
| + | MEASURE TYPE: p Performance | ||
| + | MU YEAR KEY: | ||
| + | TITLE: | ||
| + | VERY LONG DESCRIPTION: | ||
| + | THERE ARE NO LINES! | ||
| + | Edit? NO// | ||
| + | DISPLAY NAME: Required Demographics Present? Replace | ||
| + | REPORTING NAME: | ||
| + | ALTERNATIVE NUMERATOR LIST: MU12-EP-HasDemographics MU12-EP-HasDemographic | ||
| + | s | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS | ||
| + | |||
| + | Select C0Q QUALITY MEASURE NAME: | ||
| + | |||
| + | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | ||
| + | |||
| + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #8 | ||
| + | Are you adding 'MU CORE MEASURE #8' as | ||
| + | a new C0Q QUALITY MEASURE (the 95TH)? No// y (Yes) | ||
| + | C0Q QUALITY MEASURE DISPLAY NAME: MU12-EP-HasVitalSigns | ||
| + | NAME: MU CORE MEASURE #8// | ||
| + | MEASURE TYPE: p Performance | ||
| + | MU YEAR KEY: | ||
| + | TITLE: | ||
| + | VERY LONG DESCRIPTION: | ||
| + | THERE ARE NO LINES! | ||
| + | Edit? NO// | ||
| + | DISPLAY NAME: MU12-EP-HasVitalSigns Replace ... With Record Vital Signs | ||
| + | Replace | ||
| + | Record Vital Signs | ||
| + | REPORTING NAME: | ||
| + | ALTERNATIVE NUMERATOR LIST: MU12-EP-HasVitalSigns MU12-EP-HasVitalSigns | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS | ||
| − | Select C0Q QUALITY MEASURE NAME: | + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #9 ?? |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Select C0Q QUALITY MEASURE NAME: | Select C0Q QUALITY MEASURE NAME: | ||
| + | |||
| + | Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT | ||
| + | |||
| + | Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #9 | ||
| + | Are you adding 'MU CORE MEASURE #9' as | ||
| + | a new C0Q QUALITY MEASURE (the 96TH)? No// Y (Yes) | ||
| + | C0Q QUALITY MEASURE DISPLAY NAME: Record Smoking Status | ||
| + | NAME: MU CORE MEASURE #9// | ||
| + | MEASURE TYPE: p Performance | ||
| + | MU YEAR KEY: | ||
| + | TITLE: | ||
| + | VERY LONG DESCRIPTION: | ||
| + | THERE ARE NO LINES! | ||
| + | Edit? NO// | ||
| + | DISPLAY NAME: Record Smoking Status Replace | ||
| + | REPORTING NAME: | ||
| + | ALTERNATIVE NUMERATOR LIST: MU12-EP-HasSmokingStatus MU12-EP-HasSmokingSta | ||
| + | tus | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-Over?? | ||
| + | ALTERNATIVE DENOMINATOR LIST: MU12-EP-Over12 MU12-EP-Over12 | ||
| + | |||
</pre> | </pre> | ||
::From year to year some MU measures may use the same numerator and dominator lists. If this applies to you, you can simply re-use and rename a measure instead of building a new measure from scratch. Also, in this example we only created one measure to be included in our MU measure set. If you would like multiple measures to be included, you would create additional measures and name accordingly. Please note: Consistent naming is crucial for keeping measures organized. | ::From year to year some MU measures may use the same numerator and dominator lists. If this applies to you, you can simply re-use and rename a measure instead of building a new measure from scratch. Also, in this example we only created one measure to be included in our MU measure set. If you would like multiple measures to be included, you would create additional measures and name accordingly. Please note: Consistent naming is crucial for keeping measures organized. | ||
Revision as of 19:58, 5 October 2012
Contents
What is the Quality Measures Package?
The Quality Measures Package is an addition to VistA for reporting Meaningful Use and Quality Measurements. The package supports both inpatient and outpatient reporting, and computes the Meaningful Use measures from patient records.
For Quality Measurements, the reporting package relies on the VistA Reminders Patient Lists as the source for its reporting.
Licensing
The package is licensed under GPL version 2.0 or later.
http://www.gnu.org/licenses/gpl-2.0.html
Installing C0Q Quality Reporting
System Requirements
- VISTA running on an Mumps 95 compliant implementation
- CCD/CCR GENERATION UTILTIES 1.2
- PXRM*2.0*12
- PXRM*2.0*17
- TMG*1.0*17
Installation of the CCD/CCR Package
The software and documentation for the package is located here
Here are some brief instructions for installing this. Detailed instructions can be found in the above link.
Pre-requisites
Main file installation
Installation of the Quality Measures Package
Pre-requisites
Download and install the following FOIA VISTA patches if you don't already have them installed (they came out in 2009 and 2010).
You also need to install the TMG Growth Charts if you have not already done so.
Main file installation
Download and install the following builds:
IT IS VITAL THAT YOU READ THE README FILES PRIOR TO INSTALLING THE PATCHES. SOME PATCHES WILL WANT LAB TESTS TO BE LINKED. YOU MUST NOT SKIP THIS STEP OTHERWISE YOU WILL BREAK THE REMINDER BEING INSTALLED.
- QUALITY_MEASURES_1P0.KID README
- C0Q-1_SEQ-001_PAT-002.KID README
- C0Q-1_SEQ-002_PAT-003.KID README
- C0Q-1_SEQ-003_PAT-004.KID README
- C0Q-1_SEQ-004_PAT-001.KID README
Installation transcripts can be found in the respective readme files.
Post-installation Tasks
The package does not export any keys at the current time. The package's main menu is C0Q QUALITY MEASUREMENT MENU. A properly configured VISTA user who accesses this menu from their primary or secondary menus will be assumed henceforth. If you intend to place this menu on XUCORE, remember that it doesn't have a key protecting it currently. You will need to make your own.
Configuration of Package
Outpatient Configuration
Here is a summary of what we have to do to make the package work. Right now there are reciprocal dependencies in set-up that require you to go into different options more than once.
- Set-up MU Measure Parameters.
- Create Patient Lists
- Create new MU Utility Measures
- Create a Measure Set containing all your utility measures
- Use specified Reminder Rule Sets and Reminder Extracts to create patient lists in the Reminder Package
- Fill in the names of your created patient lists in the Quality Measures section
- Create a Measure Set containing all your quality measures
- Go back to your parameters and populate the Utility Measure Set and Quality Measure Set
Set-up MU Measure Parameters
Prior to building measures and measure sets, we must establish the parameters. If you’re building outpatient MU measures, “EP EDIT PARMS” should be selected (as seen above). YOU NEED TO CREATE A PARAMETER FOR EACH CLINIC.
From the main menu, choose the SETUP QUALITY REPORTING option.
Select QUALITY MEASUREMENT MENU Option: SETUP QUALITY REPORTING
DISPLAY QUALITY MEASURES
EDIT SUPERUSERS
EP EDIT PARMS
INP EDIT PARMS
MEASURE SET EDIT
MU MEASURE EDIT
QUALITY MEASURE EDIT
Select SETUP QUALITY REPORTING Option: EP EDIT PARMS
Select C0Q PARAMETER NAME: MU DR OFFICE -- Enter Name of Parameter
Are you adding 'MU DR OFFICE' as
a new C0Q PARAMETER (the 1ST)? No// y (Yes)
NAME: MU DR OFFICE Replace
MEASUREMENT PERIOD KEY: MU12 -- MUST PUT MU12 HERE OTHERWISE PACKAGE WON'T WORK!
PARAMETER TYPE: OUTPATIENT -- Inpatient or Outpatient
EP MU MEASUREMENT SET: -- To be left empty for now. Will come back to add measure set.
EP QUALITY MEASUREMENT SET: -- To be left empty for now. Will come back to add measure set.
Select CLINIC: DR OFFICE DOCTOR,FOUR --defines visit criteria. To ONLY look for visits in a specific clinic, ward, etc.
Are you adding 'DR OFFICE' as a new CLINIC (the 1ST for this C0Q PARAMETER)?
No// y (Yes)
Select CLINIC: -- NOTE: '''Package only support 1 clinic ONLY right now.'''
PATIENT LIST LABEL:
Select SUBSCRIBER:
Select C0Q PARAMETER NAME: ACME CLINIC #1
Are you adding 'ACME CLINIC #1' as a new C0Q PARAMETER (the 2ND)? No// Y
(Yes)
NAME: ACME CLINIC #1//
MEASUREMENT PERIOD KEY: MU12
PARAMETER TYPE: OUT OUTPATIENT
EP MU MEASUREMENT SET:
EP QUALITY MEASUREMENT SET:
Select CLINIC: ACME CLINIC #1 DOCTOR,TEN
Are you adding 'ACME CLINIC #1' as a new CLINIC? No// Y (Yes)
Select CLINIC:
PATIENT LIST LABEL:
Select SUBSCRIBER:
Select C0Q PARAMETER NAME: ACME CLINIC #2
Are you adding 'ACME CLINIC #2' as a new C0Q PARAMETER (the 3RD)? No// Y
(Yes)
NAME: ACME CLINIC #2//
MEASUREMENT PERIOD KEY: MU12
PARAMETER TYPE: OUT OUTPATIENT
EP MU MEASUREMENT SET:
EP QUALITY MEASUREMENT SET:
Select CLINIC: ACME CLINIC #2 DOCTOR,TEN
Are you adding 'ACME CLINIC #2' as a new CLINIC? No// Y (Yes)
Select CLINIC:
PATIENT LIST LABEL:
Select SUBSCRIBER:
Create Patient Lists
After you have created the parameters, you need to have the software create the patient lists. Choose option EP UPDATE MU MEASURES from the parent menu. Once you select “EP UPDATE MU MEASURE” you should see several lines of text (a small subset of this text can be seen above).
Select QUALITY MEASUREMENT MENU Option: EP UPDATE MU MEASURES
Jul 25, 2011@98:87:94
Jul 25, 2011@87:88:53
Jun 27, 2011@97:94:70
Jun 27, 2011@97:89:96
BAD HEALTH FACTOR: Non-Smoker (PMH)
BAD HEALTH FACTOR: Non-Tobacco User
BAD HEALTH FACTOR: Current Smoker - No
BAD HEALTH FACTOR: Current Smoker - Yes
CREATING MU12-EP-ALL-PATIENTS
CREATING MU12-EP-DR OFFICE-Patient
CREATING MU12-EP-FailedDemographics
CREATING MU12-EP-HasAllergy
C0QLIST("MU12-EP-DR OFFICE-Patient",1)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",2)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",3)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",4)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",6)=""
Oct 04, 2012@91:00C0QLIST("MU12-EP-ACME CLINIC #1-Patient",7)=""
C0QLIST("MU12-EP-ALL-PATIENTS",1)=""
C0QLIST("MU12-EP-ALL-PATIENTS",2)=""
C0QLIST("MU12-EP-ALL-PATIENTS",3)=""
C0QLIST("MU12-EP-ALL-PATIENTS",4)=""
C0QLIST("MU12-EP-ALL-PATIENTS",6)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",1)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",2)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",3)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",4)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",6)=""
Oct 04, 2012@84:00C0QLIST("MU12-EP-ACME CLINIC #1-Patient",7)=""
C0QLIST("MU12-EP-ACME CLINIC #2-Patient",4)=""
C0QLIST("MU12-EP-ALL-PATIENTS",1)=""
C0QLIST("MU12-EP-ALL-PATIENTS",2)=""
C0QLIST("MU12-EP-ALL-PATIENTS",3)=""
C0QLIST("MU12-EP-ALL-PATIENTS",4)=""
C0QLIST("MU12-EP-ALL-PATIENTS",6)=""
C0QLIST("MU12-EP-ALL-PATIENTS",7)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",1)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",2)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",3)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",4)=""
C0QLIST("MU12-EP-DR OFFICE-Patient",6)=""
CREATING MU12-EP-ACME CLINIC #1-Patient
CREATING MU12-EP-ACME CLINIC #2-Patient
CREATING MU12-EP-NoAllergyB index passed
MOVE MOVE MOVE MOVE
The parameters then update the patient lists associated with the MU measures, creating new lists (lists are auto-generated for MU measures) only if none exist. They then look for MU Measurement Sets that are in the parameters, and update them, copying over numerator and denominator patient lists, counting them, and computing the percentage. A final update should be performed to ensure the most up-to date data is reported for your MU measure/measure set (see step 6).
MOVE MOVE MOVE MOVE
Create new MU Utility Measures
The package distributes the MU Quality Measures; but the Utility measures you have to create on your own. Follow the table below to create the utility measures using option MU MEASURE EDIT. Example of how to enter them are below. If you are doing this for real, make sure to print the table and follow it.
| Measure | Quality Measures Utility Logic | Quality Measures Package Numerator | Quality Measures Package Denominator | Passing Rate |
|---|---|---|---|---|
| CPOE -- Provider directly enters in orders | Check for the presence of electronically prescribed medications stored in the Non-VA Multiple in file 55 for this patient | MU12-EP-HasMedOrders | MU12-EP-ALL-PATIENTS | Rate > 30% |
| Implement drug-drug and drug-allergy interaction checks | N/A | N/A | N/A | Report YES. Core VISTA functionality. Also part of electronic prescribing. |
| Maintain an up-to-date problem list of current and active diagnoses | Checks active problems. | MU12-EP-HasProblem | MU12-EP-ALL-PATIENTS | Rate > 80% |
| Generate and transmit permissible prescriptions electronically (eRx) | Check for the presence of electronically prescribed medications stored in the Non-VA Multiple in file 55 for this patient | MU12-EP-HasERX | MU12-EP-ALL-PATIENTS | Rate > 40% |
| Maintain active medication list | Check for the presence of electronically prescribed medications stored in the Non-VA Multiple in file 55 for this patient | MU12-EP-HasMed | MU12-EP-ALL-PATIENTS | Rate > 80% |
| Maintain active medication allergy list | Check for the presence of allergy documentation for this patient | MU12-EP-HasAllergy | MU12-EP-ALL-PATIENTS | Rate > 80% |
| Record required demographics | Check for the presence of Sex, DOB, Primary ID, Preferred Language, Race, Ethnicity for this patient. Lack of any one disqualifes you. | MU12-EP-HasDemographics | MU12-EP-ALL-PATIENTS | Rate > 50% |
| Record required vital signs | Check vital signs from July 3rd 2011 to present for this patient | MU12-EP-HasVitalSigns | MU12-EP-ALL-PATIENTS | Rate > 50% |
| Record smoking status for patients aged 13 yrs and up | Check health factors in the category Tobacco; see if patient will have these. If none found in the category, each possible health factor in a list is tried by itself. | MU12-EP-HasSmokingStatus | MU12-EP-Over12 | Rate > 50% |
| Report clinical quality measures to CMS | N/A | N/A | N/A | Report YES. Reporting specific Quality Measures will be described later. |
| Implement 1 clinical decision support rule | N/A | N/A | N/A | Report YES. If you are doing eRx, using any clinical reminders; or using any order checks, you have met this requirement. |
| Provide patients with an electronic copy of their health information | NOT COLLECTIBLE IN VISTA. NO RELEASE OF INFORMATION PACKAGE. COLLECT MANUALLY | N/A | N/A | Rate > 50% |
| Provide clinical summaries for patients for each office visit within 3 days | NOT COLLECTIBLE IN VISTA. NO RELEASE OF INFORMATION PACKAGE. COLLECT MANUALLY | N/A | N/A | Rate > 50% |
| Perform at least 1 test of exchanging key clinical information with another entity electronically | Not checked. Report YES upon test performance. | N/A | N/A | Not checked. Report YES upon test performance. |
| Protect electronic health information | Not checked. Report YES upon test performance. | N/A | N/A | Not checked. Report YES upon test performance. |
Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #1 CPOE
NAME: MU CORE MEASURE #1//
MEASURE TYPE: Performance//
MU YEAR KEY:
TITLE:
VERY LONG DESCRIPTION:
THERE ARE NO LINES!
Edit? NO//
DISPLAY NAME: CPOE//
REPORTING NAME:
ALTERNATIVE NUMERATOR LIST: MU12-EP-HasMed
1 MU12-EP-HasMed MU12-EP-HasMed
2 MU12-EP-HasMedOrders MU12-EP-HasMedOrders
3 MU12-EP-HasMedRecon MU12-EP-HasMedRecon
CHOOSE 1-3: 2 MU12-EP-HasMedOrders MU12-EP-HasMedOrders
ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS
Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #3 Problem List
NAME: MU CORE MEASURE #3//
MEASURE TYPE: Performance
MU YEAR KEY:
TITLE:
VERY LONG DESCRIPTION:
THERE ARE NO LINES!
Edit? NO//
DISPLAY NAME: Problem List//
REPORTING NAME:
ALTERNATIVE NUMERATOR LIST: MU12-EP-HasProblem//
ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS
//
Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #4
Are you adding 'MU CORE MEASURE #4' as
a new C0Q QUALITY MEASURE (the 91ST)? No// Y (Yes)
C0Q QUALITY MEASURE DISPLAY NAME: ERx
NAME: MU CORE MEASURE #4//
MEASURE TYPE: p Performance
MU YEAR KEY: ?
Answer must be 1-30 characters in length.
MU YEAR KEY:
TITLE:
VERY LONG DESCRIPTION:
THERE ARE NO LINES!
Edit? NO//
DISPLAY NAME: ERx//
REPORTING NAME:
ALTERNATIVE NUMERATOR LIST: MU12-EP-HasERX MU12-EP-HasERX
ALTERNATIVE DENOMINATOR LIST: MU-EP-ALL??
ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS
Select C0Q QUALITY MEASURE NAME:
Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #5
Are you adding 'MU CORE MEASURE #5' as
a new C0Q QUALITY MEASURE (the 92ND)? No// y (Yes)
C0Q QUALITY MEASURE DISPLAY NAME: MU12-EP-HasMed
NAME: MU CORE MEASURE #5//
MEASURE TYPE:
MU YEAR KEY:
TITLE:
VERY LONG DESCRIPTION:
THERE ARE NO LINES!
Edit? NO//
DISPLAY NAME: MU12-EP-HasMed// Active Medication List
REPORTING NAME:
ALTERNATIVE NUMERATOR LIST: MU12-EP-HasMed
1 MU12-EP-HasMed MU12-EP-HasMed
2 MU12-EP-HasMedOrders MU12-EP-HasMedOrders
3 MU12-EP-HasMedRecon MU12-EP-HasMedRecon
CHOOSE 1-3: 1 MU12-EP-HasMed MU12-EP-HasMed
ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS
Select C0Q QUALITY MEASURE NAME:
Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #6
Are you adding 'MU CORE MEASURE #6' as
a new C0Q QUALITY MEASURE (the 93RD)? No// y (Yes)
C0Q QUALITY MEASURE DISPLAY NAME: Allergy Documentation
NAME: MU CORE MEASURE #6//
MEASURE TYPE:
MU YEAR KEY: ^meas,typ MEASURE TYPE
MEASURE TYPE: p Performance
MU YEAR KEY:
TITLE:
VERY LONG DESCRIPTION:
THERE ARE NO LINES!
Edit? NO//
DISPLAY NAME: Allergy Documentation Replace
REPORTING NAME:
ALTERNATIVE NUMERATOR LIST: MU12-EP-Has
1 MU12-EP-HasAllergy MU12-EP-HasAllergy
2 MU12-EP-HasDemographics MU12-EP-HasDemographics
3 MU12-EP-HasERX MU12-EP-HasERX
4 MU12-EP-HasMed MU12-EP-HasMed
5 MU12-EP-HasMedOrders MU12-EP-HasMedOrders
Press <Enter> to see more, '^' to exit this list, OR
CHOOSE 1-5: 1 MU12-EP-HasAllergy MU12-EP-HasAllergy
ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS
Select C0Q QUALITY MEASURE NAME:
Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #7
Are you adding 'MU CORE MEASURE #7' as
a new C0Q QUALITY MEASURE (the 94TH)? No// y (Yes)
C0Q QUALITY MEASURE DISPLAY NAME: Required Demographics Present?
NAME: MU CORE MEASURE #7//
MEASURE TYPE: p Performance
MU YEAR KEY:
TITLE:
VERY LONG DESCRIPTION:
THERE ARE NO LINES!
Edit? NO//
DISPLAY NAME: Required Demographics Present? Replace
REPORTING NAME:
ALTERNATIVE NUMERATOR LIST: MU12-EP-HasDemographics MU12-EP-HasDemographic
s
ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS
Select C0Q QUALITY MEASURE NAME:
Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #8
Are you adding 'MU CORE MEASURE #8' as
a new C0Q QUALITY MEASURE (the 95TH)? No// y (Yes)
C0Q QUALITY MEASURE DISPLAY NAME: MU12-EP-HasVitalSigns
NAME: MU CORE MEASURE #8//
MEASURE TYPE: p Performance
MU YEAR KEY:
TITLE:
VERY LONG DESCRIPTION:
THERE ARE NO LINES!
Edit? NO//
DISPLAY NAME: MU12-EP-HasVitalSigns Replace ... With Record Vital Signs
Replace
Record Vital Signs
REPORTING NAME:
ALTERNATIVE NUMERATOR LIST: MU12-EP-HasVitalSigns MU12-EP-HasVitalSigns
ALTERNATIVE DENOMINATOR LIST: MU12-EP-ALL-PATIENTS MU12-EP-ALL-PATIENTS
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #9 ??
Select C0Q QUALITY MEASURE NAME:
Select SETUP QUALITY REPORTING Option: MU MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU CORE MEASURE #9
Are you adding 'MU CORE MEASURE #9' as
a new C0Q QUALITY MEASURE (the 96TH)? No// Y (Yes)
C0Q QUALITY MEASURE DISPLAY NAME: Record Smoking Status
NAME: MU CORE MEASURE #9//
MEASURE TYPE: p Performance
MU YEAR KEY:
TITLE:
VERY LONG DESCRIPTION:
THERE ARE NO LINES!
Edit? NO//
DISPLAY NAME: Record Smoking Status Replace
REPORTING NAME:
ALTERNATIVE NUMERATOR LIST: MU12-EP-HasSmokingStatus MU12-EP-HasSmokingSta
tus
ALTERNATIVE DENOMINATOR LIST: MU12-Over??
ALTERNATIVE DENOMINATOR LIST: MU12-EP-Over12 MU12-EP-Over12
- From year to year some MU measures may use the same numerator and dominator lists. If this applies to you, you can simply re-use and rename a measure instead of building a new measure from scratch. Also, in this example we only created one measure to be included in our MU measure set. If you would like multiple measures to be included, you would create additional measures and name accordingly. Please note: Consistent naming is crucial for keeping measures organized.
- 4. Create MU Measure SET and add MU Measure(s)
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select QUALITY MEASUREMENT MENU Option: SETUP QUALITY REPORTING
Select SETUP QUALITY REPORTING Option: MEASURE SET EDIT
Select C0Q MEASUREMENTS SET NAME: MU12 Measure Set -- MU12 Measure set is name of my measure set
Are you adding 'MU12 EP Measure Set' as
a new C0Q MEASUREMENTS (the 10TH)? No// y (Yes)
SET NAME: MU12 EP Measure Set// -- Hit Enter to accept the default answer
BEGIN DATE: 1-1-2012 (JAN 01, 2012) -- Beginning Date of visits to be included in the measure set
END DATE: 12-31-2012 (DEC 31, 2012) -- Ending Date of visits to be included in the measure set
LOCKED: -- Can Lock the Measure Set once completed
MU YEAR KEY: MU12 -- Key is same as period Key used above
Select MEASURE: MU12 -- Add the MU measures created in step 3 to create your measure set
1 MU12 Allergy Allergy List
CHOOSE 1-3: 1 MU12 Allergy Allergy List
Are you adding 'MU12 Allergy' as a new MEASURE (the 1ST for this C0Q MEASUREM
ENTS)? No// y (Yes)
NUMERATOR FILTER LIST:
DENOMINATOR FILTER LIST:
Select MEASURE:
Select C0Q MEASUREMENTS SET NAME:
- All applicable MU Measures created in Step 3 should be added to your Measure Set.
- 5. Link Measure Set to Parameter
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select QUALITY MEASUREMENT MENU Option: SET-UP QUALITY REPORTING
DISPLAY QUALITY MEASURES
EDIT SUPERUSERS
EP EDIT PARMS
INP EDIT PARMS
MEASURE SET EDIT
MU MEASURE EDIT
QUALITY MEASURE EDIT
Select SETUP QUALITY REPORTING Option: EP EDIT PARMS -- or INP EDIT PARMS depending on INP or OP
Select C0Q PARAMETER NAME: MU12 MU2012 Clinic Reporting -- Parameter created in Step 1
NAME: MU2012 Clinic Reporting Replace -- Hit Enter to accept the default answer
MEASUREMENT PERIOD KEY: MU12// -- Hit Enter to accept the default answer
PARAMETER TYPE: OUTPATIENT// -- Hit Enter to accept the default answer
EP MU MEASUREMENT SET: MU12 EP Measure Set -- Add MU Measure Set created in Step 5
EP QUALITY MEASUREMENT SET: -- Hit Enter to accept the default answer
Select CLINIC: DR OFFICE// -- Hit Enter to accept the default answer
PATIENT LIST LABEL: -- Hit Enter to accept the default answer
Select SUBSCRIBER: -- Hit Enter to accept the default answer
Select C0Q PARAMETER NAME:
- Your MU Measure Set (which includes MU Measures and visit time frame) is now linked to your parameter. **MU MEASURE BUILD IS COMPLETE**
- 6. Update MU Measure(s)
- Prior to printing or displaying MU Measure perform an UPDATE MU MEASURE. This will ensure we are printing or displaying the most up to date data in the system. To complete this task, follow the instructions outlined in Step 2.
- 7. Print C0Q Measures
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select QUALITY MEASUREMENT MENU Option: Print C0Q MEASURES
Select C0Q MEASUREMENTS SET NAME: MU12 EP Measure Set
DEVICE: TELNET
C0Q MEASUREMENTS LIST MAR 7,2012 08:20 PAGE 1
MEASURE:DISPLAY NAME DENOMINATOR NUMERATOR PERCENTAGE
--------------------------------------------------------------------------------
Allergy List 55 23 42.00
- Following Build, the above steps will allow you to view (validate the build) and print the MU Measure build created.
C0Q PACKAGE - CONFIGURATION of QUALITY MEASURES for MU
- The following configuration instructions ONLY apply to the building and reporting of Quality Measures. Patient lists used to configure
- C0Q quality measures are created via the Reminders Package. Patient List/Reminders build is not included in these configuration instructions.
ASSUMPTIONS:
- - The install guide applies to VistA systems running on Linux/GT.M
- - The install steps assume the VistA software is already installed and the environment variables/aliases are defined in your system.
- - These instructions assume you are logged into VistA as a user who has access to configure the C0Q package.
INSTRUCTIONS:
- 1. Set-up Parameters
- Log into VistA (user must have access to C0Q package). From GTM prompt:
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
Select QUALITY MEASUREMENT MENU Option: SETUP QUALITY REPORTING -- menu for C0Q set-up
DISPLAY QUALITY MEASURES
EDIT SUPERUSERS
EP EDIT PARMS
INP EDIT PARMS
MEASURE SET EDIT
MU MEASURE EDIT
QUALITY MEASURE EDIT
Select SETUP QUALITY REPORTING Option: EP EDIT PARMS
- Prior to building quality measures and quality measure sets, we must establish the parameters. If you’re building outpatient quality
- measures, “EP EDIT PARMS” should be selected (as seen above). If you’re building, inpatient quality measures, “INP EDIT PARMS” should be
- selected.
Select C0Q PARAMETER NAME: MU2012 Quality Measures -- Enter Name of Parameter
Are you adding 'MU2012 Quality Measures' as
a new C0Q PARAMETER (the 1ST)? No// y (Yes)
NAME: MU2012 Quality Measures Replace
MEASUREMENT PERIOD KEY: MU12 -- Period Key groups measures and lists so easy to locate and search
PARAMETER TYPE: OUTPATIENT -- defines criteria for MU Measure data
EP MU MEASUREMENT SET: -- To be left empty. We are building Quality Measures NOT MU measures.
EP QUALITY MEASUREMENT SET: -- To be left empty for now. We will come back to add quality measure set.
Select CLINIC: --Clinic NOT required for quality measure build. The clinic (if applicable) should be built into the reminder/patient list
build
PATIENT LIST LABEL:
Select SUBSCRIBER: - SUBCRIBER field designates who is allowed to see the specific quality measure set.
- End of Quality Measure Parameter Set-up. [Enter] out of the menu until you reach the QUALITY MEASUREMENT MENU (C0Q Q menu as seen below):
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select SETUP QUALITY REPORTING Option:
- 2. Create Quality Measures
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select QUALITY MEASUREMENT MENU Option: SETUP QUALITY REPORTING
DISPLAY QUALITY MEASURES
EDIT SUPERUSERS
EP EDIT PARMS
INP EDIT PARMS
MEASURE SET EDIT
MU MEASURE EDIT
QUALITY MEASURE EDIT
Select SETUP QUALITY REPORTING Option: QUALITY MEASURE EDIT
Select C0Q QUALITY MEASURE NAME: MU EP NQF 0024 -- Name of my quality measure.
NAME: MU EP NQF 0024//
MU YEAR KEY:
TITLE: NQF0024 Weight Assessment and Counseling for Children and Adolescents
Replace -- Title of my quality measure
VERY LONG DESCRIPTION: -- Description of my quality measure
1>Percentage of patients 2 -17 years of age
2>who had an outpatient visit with a Primary Care Physician
3>(PCP) or OB/GYN and who had evidence of BMI
4>percentile documentation, counseling for nutrition and
5>counseling for physical activity during the measurement
6>year.
EDIT Option:
DISPLAY NAME: NQF0024 Weight Assessment and Counseling for Children and Adolescents Replace
REPORTING NAME: NQF0027//
NUMERATOR PATIENT LIST: MU NQF0024 -- Reminder Patient List (numerator) for this quality measures should be added.
1 MU NQF0024 OBESITY KIDS DENOM PL
2 MU NQF0024 OBESITY KIDS NUM PL
CHOOSE 1-2: 2 MU NQF0024 OBESITY KIDS NUM PL -- Reminder Patient List (denominator) for this quality measure should be added.
DENOMINATOR PATIENT LIST: MU NQF0024
1 MU NQF0024 OBESITY KIDS DENOM PL
2 MU NQF0024 OBESITY KIDS NUM PL
CHOOSE 1-2: 1 MU NQF0024 OBESITY KIDS DENOM PL
QRDA TEMPLATE ROOT:
QRDA CODE: :
- In this step we are creating a Quality Measure and linking the proper numerator and denominator patient lists (from the reminders package)
- to the quality measure. These patient lists identify our population and our percentages are calculated based on list data. When installed,
- the C0Q package will likely have several Meaningful Use Quality Measures and patient lists available. If you are unable to find an applicable
- patient list, we recommend you look for an existing list, shared on the WV trac server. From the WV trac server you can download and import
- the .prd files (import into the reminders package), saving you hours of work. Please reference the reminders package for import instructions.
- https://trac.opensourcevista.net/browser/quality/tags/mu/PRD
- In addition, from year to year some quality measures may use the same numerator and dominator lists. If this applies to you, you can simply
- re-use (refresh) and rename a measure instead of building a new measure from scratch. Also, in this example we only created one quality
- measure to be included in our quality measure set. If you would like multiple measures to be included, you would create additional measures
- and name accordingly. Please note: Consistent naming is crucial for keeping measures organized.
- 3. Create Quality Measure SET and add Quality Measure(s)
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select QUALITY MEASUREMENT MENU Option: SETUP QUALITY REPORTING
DISPLAY QUALITY MEASURES
EDIT SUPERUSERS
EP EDIT PARMS
INP EDIT PARMS
MEASURE SET EDIT
MU MEASURE EDIT
QUALITY MEASURE EDIT
Select SETUP QUALITY REPORTING Option: MEASURE SET EDIT
Select C0Q MEASUREMENTS SET NAME: MU12 Quality Measure Set -- Name of my measure set
Are you adding 'MU12 Quality Measure Set' as
a new C0Q MEASUREMENTS (the 12TH)? No// y (Yes)
SET NAME: MU12 Quality Measure Set Replace
BEGIN DATE: --Begin Date is NOT required for quality measure build. The date (if applicable) should be built into the reminder build.
END DATE: --End Date is NOT required for quality measure build. The date (if applicable) should be built into the reminder build.
LOCKED: -- Measure Set LOCK should be set after reporting period has ended.
MU YEAR KEY: MU12
Select MEASURE: MU EP NQF 0024 -- Adding our quality measure (created in step 2) to our measure set
Select MEASURE: MU EP NQF 0024 NQF0024 Weight Assessment and Counseling for Children and Adolescents
Are you adding 'MU EP NQF 0024' as a new MEASURE (the 1ST for this C0Q MEASUREMENTS)? No// y (Yes)
NUMERATOR FILTER LIST:
DENOMINATOR FILTER LIST:
Select MEASURE:
Select C0Q MEASUREMENTS SET NAME:
- All applicable Quality Measures created in Step 2 should be added to your Measure Set.
- 4. Link Measure Set to Parameter
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select QUALITY MEASUREMENT MENU Option: SET-UP QUALITY REPORTING
DISPLAY QUALITY MEASURES
EDIT SUPERUSERS
EP EDIT PARMS
INP EDIT PARMS
MEASURE SET EDIT
MU MEASURE EDIT
QUALITY MEASURE EDIT
Select SETUP QUALITY REPORTING Option: EP EDIT PARMS -- or INP EDIT PARMS depending on INP or OP
Select C0Q PARAMETER NAME: MU2012 Quality Measures -- Parameter created in Step 1
NAME: MU2012 Quality Measures Replace -- Hit Enter to accept the default answer
MEASUREMENT PERIOD KEY: MU12// -- Hit Enter to accept the default answer
PARAMETER TYPE: OUTPATIENT// -- Hit Enter to accept the default answer
EP MU MEASUREMENT SET: -- Leave blank, we are not creating a MU measure set
EP QUALITY MEASUREMENT SET: MU12 Quality Measure Set -- Add Quality Measure Set created in Step 3
Select CLINIC: -- Hit Enter to accept the default answer
PATIENT LIST LABEL: -- Hit Enter to accept the default answer
Select SUBSCRIBER: -- Hit Enter to accept the default answer
Select C0Q PARAMETER NAME:
- Your Quality Measure Set is now linked to your parameter. ** QUALITY MEASURE BUILD IS COMPLETE**
- 5. Copy Over Patient Lists
- Prior to printing or displaying Quality Measure data, a copy of the patient list (that are being used in your quality measure set) data is
needed. To update:
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select QUALITY MEASUREMENT MENU Option: COPY OVER PATIENT LISTS
Select C0Q MEASUREMENTS SET NAME: MU12 Quality Measure Set
C0QFDA(1130580001.2011,"1,12,",1.1)=2
C0QFDA(1130580001.20111,"+1,1,12,",.01)=13
C0QFDA(1130580001.20111,"+2,1,12,",.01)=14
C0QFDA(1130580001.2011,"1,12,",2.1)=13
C0QFDA(1130580001.20112,"+1,1,12,",.01)=12
C0QFDA(1130580001.20112,"+10,1,12,",.01)=90
C0QFDA(1130580001.20112,"+11,1,12,",.01)=91………….
- This will ensure we are printing or displaying the most up to date data in the system.
- 6. Print C0Q Measures
GTM>D ^XUP -- enter the programmer environment
Select OPTION NAME: COQ Q -- enter C0Q module
1 C0Q QUALITY MEASURE DEFINITION QUALITY MEASURE DEFINITION
2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
CHOOSE 1-2: 2 C0Q QUALITY MEASUREMENT MENU QUALITY MEASUREMENT MENU
COPY OVER PATIENT LISTS
ED-1 COMPUTATION
ED-2 COMPUTATION
EP UPDATE MU MEASURES
INP UPDATE MU MEASURES
PQRI MENU ...
PQRI PRINT XML
PRINT C0Q MEASURES
SETUP QUALITY REPORTING ...
Select QUALITY MEASUREMENT MENU Option: Print C0Q MEASURES
Select C0Q MEASUREMENTS SET NAME: MU12 Quality Measure Set
DEVICE: TELNET
C0Q MEASUREMENTS LIST APR 4,2012 07:50 PAGE 1
MEASURE:DISPLAY NAME DENOMINATOR NUMERATOR PERCENTAGE
--------------------------------------------------------------------------------
NQF0024 Weight 13 2 15.00
Assessment and
Counseling for Children
and Adolescents
Contributors
- - George Lilly
- - Oroville Hosptial
- - Ryan Grimm and Luke Dubay (Install and Config documentation)
- -Twin Cities EMR Consulting, LLC. (Minneapolis, MN)
